5.08mm Pitch Pcb Connectors, Board In Connector With Brass /
1, Detailed specification table of product
|Insulation O.D.||3.10mm(max) or 2.5mm(max)|
|Electrical properties||Current Rating||10A AC, DC|
|Voltage Rating||250V AC, DC|
|Contact Resistance||10mΩ Max|
|Insulation Resistance||1000MΩ Min|
|Withstanding Voltage||1500V AC/minute|
|Mechanical properties||Temperature range||-25℃ to 85 ℃|
|Terminal Insertion Force||2.0kgf (Max.)|
|Terminal/Housing Retention Force|
|Pin Retention Force||2.00kgf (Min.)|
|Other information please kindly check the following picture.|
2, Introduction for this series products
Please kindly notice that the C5080 series product, you can buy it
as a set, then we will offer you reasonable set price.
|C5080 series product|
|Terminal||C5080F-T and C5080M-T-A|
|Wafer||Vertical mouting type||C5080WV-04P|
3, Corresponding engineering drawing & test report
Below file is our engineering drawing and testing report for
further information. It's sure that it will be a
good reference for you to know this series parts clearly.
|5-1||Actuator Insertion & Withdrawal Force||Insert and withdraw connectors at the speed rate of 25±3mm /
minute.||Refer to paragraph 7|
|5-2||Crimping Pull Out Force||Fix the crimped terminal, apply axial pull out force on the wire at
the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)||AWG#14||11.0kgf (Min)|
|5-3||Terminal Insertion Force.||Insert the crimped terminal into the housing.||2.00kgf (Max.)|
|5-4||Terminal/Housing Retention Force.||Apply axial pull out force at the speed rate of 25±3mm / minute on
the terminal assembled in the housing.||3.00kgf (Min.)|
|5-5||Pin Retention Force||Apply axial push force at the speed rate of 25±3mm / minute||2.0kgf (Min.)|
|5-6||Durability||When mated up to 50 cycles repeatedly by the rate of 10 cycle per
minute.||Contact Resistance 20mΩ (Max.)|
Amplitude: 1.5mm P-P
Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each
(Based upon MIL-STD-202 Method 201A)
Appearance No Damage.
Contact Resistance 20mΩ (Max.)
Discontinuity 1 μsec.(Max.)
|5-8||Physical Shock||490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS
C0041/MIL-STD-202 Method 213B Cond. A)|
4,Why choose us
1). We are in Donguan,the hometown of electronics parts in China.
We can provide you the most competitive products.
2). We have sampling more than 8000 types of products for our
custom in the past 12 years.
3).There is a a pool of experienced, sophisticated work of the top
technical talent, and use of advanced automated production
equipment, full assurance of the quality of the products.
4).Our customers are located all over the world including
China,Singapore,Austrillia ,Korea, India, USA and many countries in
Europe as well as Africa and South America.
5, Our product family show
Please kindly look the next picture, you can know our product range
by an easy way. Our main product are wire housing, wire to board
connectoor, wire to wire connector, board-in connectors, FPC/FFC
connectors and more.